Filters
954 products viewed
Filters
3/4" Thermostatic Shower Valve & Trim - 2-Output
The 2740 series of products from Flusso uses the TVH.2717F Thermostatic valve which features 3/4″ NPT connections and has 2 water outputs [ports] which are operable one at a time without shared port operation. This product meets CAL-Green compliance criteria. The right handle sets the temperature. The left handle controls water diversion between the 2 water output ports. Each port has full volume control capability.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2717F can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The bottom handle is used to control the temperature of water flowing through the outlet ports. The top handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. In order to adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.CARTRIDGE – The TVH.2717F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15109 cartridge which is a 2 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15103] can also be used to activate 2 ports at the same time. Collection Serie 270 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 270.2740BN Brushed Nickel PVD USD1,247.00 270.2740PN Polished Nickel PVD USD1,247.00 270.2740SB Satin Brass PVD USD1,302.00 270.2740BB Brushed Bronze PVD USD1,302.00
$1,247.00
3/4" Thermostatic Shower Valve & Trim - 1- Output
The 2720 series of products from Flusso use the TVH.2693 Thermostatic valve which features 3/4″ NPT connections and has one water output. The right handle sets the temperature. The left handle controls water volume.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2693 can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to turn water on and off and can control the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 270 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 270.2720BN Brushed Nickel PVD USD1,081.00 270.2720PN Polished Nickel PVD USD1,081.00 270.2720SB Satin Brass PVD USD1,136.00 270.2720BB Brushed Bronze PVD USD1,136.00
$1,081.00
3/4" Horizontal Thermostatic Shower Valve & Trim - 2 Output
The TVH.2717F Thermostatic valve features 3/4″ NPT connections and has 2 water outputs [ports] which are operable one at a time without shared port operation. This product meets CAL-Green compliance criteria. The right handle sets the temperature. The left handle controls water diversion between the 2 water output ports. Each port has full volume control capability.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2717F can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. In order to adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.CARTRIDGE – The TVH.2717F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15109 cartridge which is a 2 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15103] can also be used to activate 2 ports at the same time. Collection Serie 270 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 270.2717BN Brushed Nickel PVD USD1,247.00 270.2717PN Polished Nickel PVD USD1,247.00 270.2717SB Satin Brass PVD USD1,302.00 270.2717BB Brushed Bronze PVD USD1,302.00
$1,247.00
Two Output Shower Set With Shower Head, Hand Held And Slide Bar
The *7350 series shower sets from Flusso come with a thermostatic valve and trim with a 2 output diverter, wall mount shower arm + head and hand shower set with adjustable slide bar and holder. SHOWER VALVE & TRIM: Solid Brass Valve & Trim Thermostatic valve With service stops Bottom handle controls temp. Top handle diverts waters RAIN HEAD: Single function Solid Brass construction 1.75 GPM flow rate 20° tilt HAND SHOWER SET: Single function Solid brass construction With back-flow prevention Adjustable height slide bar 1.75 GPM flow rate Collection Serie 260 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 260.7350CP Chrome USD2,150.00 260.7350BN Brushed Nickel PVD USD2,351.00 260.7350PN Polished Nickel PVD USD2,324.00 260.7350MB Matte Black USD2,487.00 260.7350SB Satin Brass PVD USD2,487.00 260.7350BB Brushed Bronze PVD USD2,487.00
$2,150.00
3/4" Horizontal Thermostatic Shower Valve & Trim - 3 Output
The TVH.2705F Thermostatic valve features 3/4″ NPT connections and has 3 water outputs [ports] which are operable one at a time without shared port operation. This product meets CAL-Green compliance criteria. The right handle sets the temperature. The left handle controls water diversion between the 3 water output ports. Each port has full volume control capability.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2705F can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.CARTRIDGE – The TVH.2705F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15100 cartridge which is a 3 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15200] can also be used to activate 2 out of 3 ports at the same time. Collection Serie 270 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 270.2705BN Brushed Nickel PVD USD1,247.00 270.2705PN Polished Nickel PVD USD1,247.00 270.2705SB Satin Brass PVD USD1,302.00 270.2705BB Brushed Bronze PVD USD1,302.00
$1,247.00
3/4" Horizontal Thermostatic Shower Valve & Trim - 1 Ouptut
The TVH.2693 Thermostatic valve features 3/4″ NPT connections and has one water output. The right handle sets the temperature. The left handle controls water volume.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2693 can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to turn water on and off and can control the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 270 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 270.2693BN Brushed Nickel PVD USD1,081.00 270.2693PN Polished Nickel PVD USD1,081.00 270.2693SB Satin Brass PVD USD1,136.00 270.2693BB Brushed Bronze PVD USD1,136.00
$1,081.00
Two Output Shower Set With Shower Head And Hand Held
The *7250 series shower set from Flusso come with a thermostatic valve and trim with a 2 output diverter, wall mount shower arm + head and handshower set with elbow / holder. SHOWER VALVE & TRIM: Solid Brass Valve & Trim Thermostatic valve With service stops Bottom handle controls temp. Top handle diverts water RAIN HEAD: Single function Solid Brass construction 20° tilt 1.75 GPM flow rate HAND SHOWER SET: Single function Solid brass construction With back-flow prevention Adjustable slide on elbow 1.75 GPM flow rate Collection Serie 260 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 260.7250CP Chrome USD1,995.00 260.7250BN Brushed Nickel PVD USD2,186.00 260.7250PN Polished Nickel PVD USD2,159.00 260.7250MB Matte Black USD2,307.00 260.7250SB Satin Brass PVD USD2,307.00 260.7250BB Brushed Bronze PVD USD2,307.00
$1,995.00
Single Output Shower Set With Shower Head And Arm
SHOWER VALVE & TRIM: Solid Brass Valve & Trim Thermostatic valve With service stops Bottom handle controls temp. Top handle diverts water RAIN HEAD: Single function Solid Brass construction 20° tilt 1.75 GPM flow rate Collection Serie 260 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 260.7000CP Chrome USD1,481.00 260.7000BN Brushed Nickel PVD USD1,635.00 260.7000PN Polished Nickel PVD USD1,608.00 260.7000MB Matte Black USD1,717.00 260.7000SB Satin Brass PVD USD1,717.00 260.7000BB Brushed Bronze PVD USD1,717.00
$1,481.00
