Filters
2512 products viewed
Filters
3/4 Thermostatic Shower Valve & Trim - 1 Output
The TVH.4101 Thermostatic valve features 3/4″ NPT connections and has 1 output port. The bottom handle sets the temperature, and the top handle controls the water volume.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The bottom handle is used to control the temperature of water flowing through the outlet. The top handle can control the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position, as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION - As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77 and 3.44 inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 6.49 x 4.44 Inches which are properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 250 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 250.4101CP Chrome USD933.00 250.4101BN Brushed Nickel PVD USD965.00 250.4101MB Matte Black USD990.00
$933.00
3/4 Thermostatic Valve & Trim - 3 Output
The TVH.4301F Thermostatic valve features 3/4" female NPT connections and has 3 water output ports. This product meets CAL-Green Compliance. The bottom handle sets the temperature and the top handle diverts water flow between the Three output ports.Supply Stops - There are two safety stops at each water inlet to stop water flow in case of installation and repairs.Handle Operation - The bottom handle is used to control the temperature of water flowing through the outlet. The top handle can control the volume of water from full flow to a trickle as the handle is turned from OFF to ON position.As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve is installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.Cut Out Dimensions - The cut out in wall should be 6.49 X 4.44 Inches and no more – this will ensure that the trim plate will cover the cut-out hole in the wall.Trims - The trims comprise of a well finished cover plate and handle knobs. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the temperature handle knob which has a push button on the side. To adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a ruSBer mallet might be required) for it to function properly.Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.Cartridge – The TVH.4301F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15100 cartridge which is a 3 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15200] can also be used to activate 2 out of 3 ports at the same time. Collection Serie 240 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 240.4301CP Chrome USD1,258.00 240.4301BN Brushed Nickel PVD USD1,314.00 240.4301PN Polished Nickel PVD USD1,314.00 240.4301MB Matte Black USD1,390.00 240.4301SB Satin Brass PVD USD1,414.00 240.4301BB Brushed Bronze PVD USD1,414.00
$1,258.00
3/4 Thermostatic Valve & Trim - 3 Output
The TVH.4301F Thermostatic valve features 3/4" female NPT connections and has 3 water output ports. This product meets CAL-Green Compliance. The bottom handle sets the temperature and the top handle diverts water flow between the Three output ports.Supply Stops - There are two safety stops at each water inlet to stop water flow in case of installation and repairs.Handle Operation - The bottom handle is used to control the temperature of water flowing through the outlet. The top handle can control the volume of water from full flow to a trickle as the handle is turned from OFF to ON position.As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve is installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.Cut Out Dimensions - The cut out in wall should be 6.49 X 4.44 Inches and no more – this will ensure that the trim plate will cover the cut-out hole in the wall.Trims - The trims comprise of a well finished cover plate and handle knobs. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the temperature handle knob which has a push button on the side. To adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.Cartridge – The TVH.4301F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15100 cartridge which is a 3 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15200] can also be used to activate 2 out of 3 ports at the same time. Collection Serie 250 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 250.4301CP Chrome USD1,232.00 250.4301BN Brushed Nickel PVD USD1,264.00 250.4301MB Matte Black USD1,289.00
$1,232.00
3/4 Thermostatic Valve & Trim - 4 Output
The TVH.4801 Thermostatic valve features 3/4" NPT connections and has 4 water outputs [ports], two of which are operable simultaneously, i.e. both at the same time, or one at a time.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The middle handle sets the temperature. The top handle controls output port 1 and 2 and the bottom handle controls output port 3 and 4. Each port has full volume control capability and can be activated at the same time. Output ports 1 and 2 cannot operate simultaneously. Output ports 3 and 4 cannot operate simultaneously.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full hot position, as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77 and 3.44 inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 8.81 X 4.44 Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 150 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 150.4801CP Chrome USD1,547.00
$1,547.00
3/4 Thermostatic Valve & Trim - 4 Output
The TVH.4801 Thermostatic valve features 3/4" NPT connections and has 4 water outputs [ports], two of which are operable simultaneously, i.e. both at the same time, or one at a time.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The middle handle sets the temperature. The top handle controls output port 1 and 2 and the bottom handle controls output port 3 and 4. Each port has full volume control capability and can be activated at the same time. Output ports 1 and 2 cannot operate simultaneously. Output ports 3 and 4 cannot operate simultaneously.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full hot position, as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77 and 3.44 inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 8.81 X 4.44 Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 196 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 196.4801CP Chrome USD1,581.00 196.4801BN Brushed Nickel PVD USD1,645.00 196.4801PN Polished Nickel PVD USD1,645.00 196.4801MB Matte Black USD1,736.00 196.4801SB Satin Brass PVD USD1,671.00 196.4801DR Deep Red USD2,062.00 196.4801LG Leaf Green USD2,062.00 196.4801DT Dark Tan USD2,062.00 196.4801GMG Gun Metal Grey USD2,062.00 196.4801LT Light Tan USD2,062.00 196.4801NB Navy Blue USD2,062.00 196.4801FG Flusso Green USD2,062.00 196.4801AG Army Green USD2,062.00 196.4801VB Vortex Brown USD2,062.00 196.4801LV Light Verde USD2,062.00 196.4801DGR Dark Green USD2,062.00 196.4801CR Crimson USD2,062.00 196.4801RG Rock Grey USD2,062.00 196.4801DG Dark Grey USD2,062.00 196.4801BP Blue Platinum USD2,062.00 196.4801SKB Sky Blue USD2,062.00 196.4801SG Steel Grey USD2,062.00 196.4801GB Gloss Black USD2,062.00
$1,581.00
3/4 Thermostatic Valve & Trim - With 2-Way Diverter - 2 Output
The TVH.4420F Thermostatic valve features 3/4" female NPT connections and has 2 water output ports. This product meets CAL-Green Compliance. The bottom handle sets the temperature, and the top handle diverts water flow between the two output ports.Supply Stops - There are two safety stops at each water inlet to stop water flow in case of installation and repairs.Handle Operation - The bottom handle is used to control the temperature of water flowing through the outlet. The top handle can control the volume of water from full flow to a trickle as the handle is turned from OFF to ON position.As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve is installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.Cut Out Dimensions - The cut out in wall should be 6.49 X 4.44 Inches and no more – this will ensure that the trim plate will cover the cut-out hole in the wall.Trims - The trims comprise of a well finished cover plate and handle knobs. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the temperature handle knob which has a push button on the side. To adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.Cartridge – The TVH.4420F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15109 cartridge which is a 2 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15103] can also be used to activate 2 ports at the same time. Collection Serie 196 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 196.4422CP Chrome USD1,068.00 196.4422BN Brushed Nickel PVD USD1,143.00 196.4422PN Polished Nickel PVD USD1,143.00 196.4422MB Matte Black USD1,195.00 196.4422SB Satin Brass PVD USD1,195.00 196.4422DR Deep Red USD1,409.00 196.4422LG Leaf Green USD1,409.00 196.4422DT Dark Tan USD1,409.00 196.4422GMG Gun Metal Grey USD1,409.00 196.4422LT Light Tan USD1,409.00 196.4422NB Navy Blue USD1,409.00 196.4422FG Flusso Green USD1,409.00 196.4422AG Army Green USD1,409.00 196.4422VB Vortex Brown USD1,409.00 196.4422LV Light Verde USD1,409.00 196.4422DGR Dark Green USD1,409.00 196.4422CR Crimson USD1,409.00 196.4422RG Rock Grey USD1,409.00 196.4422DG Dark Grey USD1,409.00 196.4422BP Blue Platinum USD1,409.00 196.4422SKB Sky Blue USD1,409.00 196.4422SG Steel Grey USD1,409.00 196.4422GB Gloss Black USD1,409.00
$1,068.00
3/4 Thermostatic Valve & Trim - With 2-Way Diverter - 2 Output
The TVH.4420F Thermostatic valve features 3/4" female NPT connections and has 2 water output ports. This product meets CAL-Green Compliance. The bottom handle sets the temperature, and the top handle diverts water flow between the two output ports.Supply Stops - There are two safety stops at each water inlet to stop water flow in case of installation and repairs.Handle Operation - The bottom handle is used to control the temperature of water flowing through the outlet. The top handle can control the volume of water from full flow to a trickle as the handle is turned from OFF to ON position.As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve is installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.Cut Out Dimensions - The cut out in wall should be 6.49 X 4.44 Inches and no more – this will ensure that the trim plate will cover the cut-out hole in the wall.Trims - The trims comprise of a well finished cover plate and handle knobs. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the temperature handle knob which has a push button on the side. To adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a ruSBer mallet might be required) for it to function properly.Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.Cartridge – The TVH.4420F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15109 cartridge which is a 2 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15103] can also be used to activate 2 ports at the same time. Collection Serie 240 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 240.4420CP Chrome USD1,125.00 240.4420BN Brushed Nickel PVD USD1,181.00 240.4420PN Polished Nickel PVD USD1,181.00 240.4420MB Matte Black USD1,257.00 240.4420SB Satin Brass PVD USD1,281.00 240.4420BB Brushed Bronze PVD USD1,281.00
$1,125.00
3/4 Thermostatic Valve & Trim - With 2-Way Diverter - 2 Output
The TVH.4420F Thermostatic valve features 3/4" female NPT connections and has 2 water output ports. This product meets CAL-Green Compliance. The bottom handle sets the temperature, and the top handle diverts water flow between the two output ports.Supply Stops - There are two safety stops at each water inlet to stop water flow in case of installation and repairs.Handle Operation - The bottom handle is used to control the temperature of water flowing through the outlet. The top handle can control the volume of water from full flow to a trickle as the handle is turned from OFF to ON position.As the valve is installed, care should be taken to maintain proper distance from the back of the valve to the finished tile which should be between 2.77” and 3.44” inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve is installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.Cut Out Dimensions - The cut out in wall should be 6.49 X 4.44 Inches and no more – this will ensure that the trim plate will cover the cut-out hole in the wall.Trims - The trims comprise of a well finished cover plate and handle knobs. Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, temperature of the water is regulated. Covering this ring is the temperature handle knob which has a push button on the side. To adjust the water temperature, one needs to press this button and move the handle to hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.Cartridge – The TVH.4420F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15109 cartridge which is a 2 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15103] can also be used to activate 2 ports at the same time. Collection Serie 250 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 250.4420CP Chrome USD1,099.00 250.4420BN Brushed Nickel PVD USD1,131.00 250.4420MB Matte Black USD1,156.00
$1,099.00
