Filters
2512 products viewed
Filters
3/4 Horizontal Thermostatic Shower Valve % Trim - 1 Ouptut
The TVH.2693 Thermostatic valve features 3/4″ NPT connections and has one water output. The right handle sets the temperature. The left handle controls water volume.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2693 can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to turn water on and off and can control the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a ruSBer mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 240 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 240.2693CP Chrome USD1,015.00 240.2693BN Brushed Nickel PVD USD1,066.00 240.2693PN Polished Nickel PVD USD1,066.00 240.2693MB Matte Black USD1,119.00 240.2693SB Satin Brass PVD USD1,137.00 240.2693BB Brushed Bronze PVD USD1,137.00
$1,015.00
3/4 Horizontal Thermostatic Shower Valve & Trim - 2 Output
The TVH.2717F Thermostatic valve features 3/4″ NPT connections and has 2 water outputs [ports] which are operable one at a time without shared port operation. This product meets CAL-Green compliance criteria. The right handle sets the temperature. The left handle controls water diversion between the 2 water output ports. Each port has full volume control capability.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2717F can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. In order to adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a ruSBer mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.CARTRIDGE – The TVH.2717F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15109 cartridge which is a 2 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15103] can also be used to activate 2 ports at the same time. Collection Serie 240 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 240.2717CP Chrome USD1,181.00 240.2717BN Brushed Nickel PVD USD1,232.00 240.2717PN Polished Nickel PVD USD1,232.00 240.2717MB Matte Black USD1,285.00 240.2717SB Satin Brass PVD USD1,304.00 240.2717BB Brushed Bronze PVD USD1,304.00
$1,181.00
3/4 Horizontal Thermostatic Shower Valve & Trim - 3 Output
The TVH.2705F Thermostatic valve features 3/4″ NPT connections and has 3 water outputs [ports] which are operable one at a time without shared port operation. This product meets CAL-Green compliance criteria. The right handle sets the temperature. The left handle controls water diversion between the 3 water output ports. Each port has full volume control capability.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2705F can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.CARTRIDGE – The TVH.2705F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15100 cartridge which is a 3 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15200] can also be used to activate 2 out of 3 ports at the same time. Collection Serie 196 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 196.2705CP Chrome USD1,226.00 196.2705BN Brushed Nickel PVD USD1,282.00 196.2705PN Polished Nickel PVD USD1,282.00 196.2705MB Matte Black USD1,326.00 196.2705SB Satin Brass PVD USD1,326.00 196.2705DR Deep Red USD1,563.00 196.2705LG Leaf Green USD1,563.00 196.2705DT Dark Tan USD1,563.00 196.2705GMG Gun Metal Grey USD1,563.00 196.2705LT Light Tan USD1,563.00 196.2705NB Navy Blue USD1,563.00 196.2705FG Flusso Green USD1,563.00 196.2705AG Army Green USD1,563.00 196.2705VB Vortex Brown USD1,563.00 196.2705LV Light Verde USD1,563.00 196.2705DGR Dark Green USD1,563.00 196.2705CR Crimson USD1,563.00 196.2705RG Rock Grey USD1,563.00 196.2705DG Dark Grey USD1,563.00 196.2705BP Blue Platinum USD1,563.00 196.2705SKB Sky Blue USD1,563.00 196.2705SG Steel Grey USD1,563.00 196.2705GB Gloss Black USD1,563.00
$1,226.00
3/4 Horizontal Thermostatic Shower Valve & Trim - 3 Output
The TVH.2705F Thermostatic valve features 3/4″ NPT connections and has 3 water outputs [ports] which are operable one at a time without shared port operation. This product meets CAL-Green compliance criteria. The right handle sets the temperature. The left handle controls water diversion between the 3 water output ports. Each port has full volume control capability.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2705F can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a ruSBer mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.CARTRIDGE – The TVH.2705F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15100 cartridge which is a 3 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15200] can also be used to activate 2 out of 3 ports at the same time. Collection Serie 240 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 240.2705CP Chrome USD1,181.00 240.2705BN Brushed Nickel PVD USD1,232.00 240.2705PN Polished Nickel PVD USD1,232.00 240.2705MB Matte Black USD1,285.00 240.2705SB Satin Brass PVD USD1,304.00 240.2705BB Brushed Bronze PVD USD1,304.00
$1,181.00
3/4 Horizontal Thermostatic Valve with 2 Volume Controls & Trim
The TVH.2705F Thermostatic valve features 3/4″ NPT connections and has 3 water outputs [ports] which are operable one at a time without shared port operation. This product meets CAL-Green compliance criteria. The right handle sets the temperature. The left handle controls water diversion between the 3 water output ports. Each port has full volume control capability.HORIZONTAL OR VERTICAL INSTALLATION – The TVH.2705F can be installed horizontally or vertically.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The right handle is used to control the temperature of water flowing through the outlet ports. The left handle is used to divert the water between each output port and is= capable of controlling the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position – as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION -As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77″ and 3.44″ inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 7.89″ x 1.89″ Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles.CARTRIDGE – The TVH.2705F valve can be used with two cartridges. The default cartridge that the valve comes with is the Model # 15100 cartridge which is a 3 output non-shared [CAL-Green Compliant] cartridge. A shared port operation cartridge [Model # 15200] can also be used to activate 2 out of 3 ports at the same time. Collection Serie 196 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 196.2705CP Chrome USD1,226.00 196.2705BN Brushed Nickel PVD USD1,282.00 196.2705PN Polished Nickel PVD USD1,282.00 196.2705MB Matte Black USD1,326.00 196.2705SB Satin Brass PVD USD1,326.00 196.2705DR Deep Red USD1,563.00 196.2705LG Leaf Green USD1,563.00 196.2705DT Dark Tan USD1,563.00 196.2705GMG Gun Metal Grey USD1,563.00 196.2705LT Light Tan USD1,563.00 196.2705NB Navy Blue USD1,563.00 196.2705FG Flusso Green USD1,563.00 196.2705AG Army Green USD1,563.00 196.2705VB Vortex Brown USD1,563.00 196.2705LV Light Verde USD1,563.00 196.2705DGR Dark Green USD1,563.00 196.2705CR Crimson USD1,563.00 196.2705RG Rock Grey USD1,563.00 196.2705DG Dark Grey USD1,563.00 196.2705BP Blue Platinum USD1,563.00 196.2705SKB Sky Blue USD1,563.00 196.2705SG Steel Grey USD1,563.00 196.2705GB Gloss Black USD1,563.00
$1,226.00
3/4 Horizontal Thermostatic Valve with 2 Volume Controls & Trim
The TVH.2715 Thermostatic valve features 3/4” NPT connections and has 2 water outputs [ports] which are operable simultaneously, i.e both at the same time, or one at a time. The middle handle sets the temperature. The left handle controls output port 1 and the right handle controls output port 2. Each port has full volume control capability.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The middle handle is used to control the temperature of water flowing through the outlet. The left handle controls the volume of water from full flow to a trickle for the output port 1. The right handle controls the volume of water from full flow to a trickle for the output port 2.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. In order to adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77 and 3.44 inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 2.08 X 12.48 Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 196 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 196.2715CP Chrome USD1,389.00 196.2715BN Brushed Nickel PVD USD1,473.00 196.2715PN Polished Nickel PVD USD1,473.00 196.2715MB Matte Black USD1,530.00 196.2715SB Satin Brass PVD USD1,530.00 196.2715DT Dark Tan USD1,778.00 196.2715DGR Dark Green USD1,778.00 196.2715RG Rock Grey USD1,778.00 196.2715LT Light Tan USD1,778.00 196.2715IG Flusso Green USD1,778.00 196.2715VB Vortex Brown USD1,778.00 196.2715DR Deep Red USD1,778.00 196.2715LV Light Verde USD1,778.00 196.2715AG Army Green USD1,778.00 196.2715DG Dark Grey USD1,778.00 196.2715LG Leaf Green USD1,778.00 196.2715NB Navy Blue USD1,778.00 196.2715GB Gloss Black USD1,778.00 196.2715BP Blue Platinum USD1,778.00 196.2715SKB Sky Blue USD1,778.00 196.2715CR Crimson USD1,778.00 196.2715GMG Gun Metal Grey USD1,778.00 196.2715SG Steel Grey USD1,778.00
$1,389.00
3/4 Horizontal Thermostatic Valve with 2 Volume Controls & Trim
The TVH.2715 Thermostatic valve features 3/4” NPT connections and has 2 water outputs [ports] which are operable simultaneously, i.e both at the same time, or one at a time. The middle handle sets the temperature. The left handle controls output port 1 and the right handle controls output port 2. Each port has full volume control capability.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The middle handle is used to control the temperature of water flowing through the outlet. The left handle controls the volume of water from full flow to a trickle for the output port 1. The right handle controls the volume of water from full flow to a trickle for the output port 2.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. In order to adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a rubber mallet might be required) for it to function properly.VALVE INSTALLATION – As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77 and 3.44 inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 2.08 X 12.48 Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 240 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 240.2715CP Chrome USD1,309.00 240.2715BN Brushed Nickel PVD USD1,393.00 240.2715PN Polished Nickel PVD USD1,393.00 240.2715MB Matte Black USD1,452.00 240.2715BB Brushed Bronze PVD USD1,478.00
$1,309.00
3/4 Thermostatic Shower Valve & Trim - 1 Output
The TVH.4101 Thermostatic valve features 3/4″ NPT connections and has 1 output port. The bottom handle sets the temperature, and the top handle controls the water volume.SUPPLY STOPS – There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.HANDLE OPERATION – The bottom handle is used to control the temperature of water flowing through the outlet. The top handle can control the volume of water from full flow to a trickle.ANTI-SCALD RING – Over the temperature control knob, is an anti-scald temperature stop ring which is a safety feature in this thermostatic value. With the help of this ring, the temperature of the water is regulated. Covering this ring is the handle knob which has a push-button on the side. To adjust the water temperature, one needs to press this button and move the handle to a hot or cold direction. Without pressing it, the user will not be able to rotate the handle to the full HOT position, as an anti-scald prevention mechanism. The anti-scald temperature stop ring should be fitted tightly over the valve (tapping using a ruSBer mallet might be required) for it to function properly.VALVE INSTALLATION - As the valve is installed, care should be taken to maintain a proper distance from the back of the valve to the finished tile which should be between 2.77 and 3.44 inches [Rough In Spec]. Also, the value must be installed straight and not at an angle or upside down. In case, the tile is thicker, or valve installed in the wall is too deep, extension kits are available and can be used for elongating both handles of the valve.CUT OUT DIMENSIONS – The cut out in wall should be 6.49 x 4.44 Inches which are properly covered by the trim plate. This will ensure that the trim plate will cover the cut-out hole in the wall.TRIMS – The trims comprise of a well-finished cover plate and handle knobs. The trim plate is used to cover the wall. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 240 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 240.4101CP Chrome USD959.00 240.4101BN Brushed Nickel PVD USD1,015.00 240.4101PN Polished Nickel PVD USD1,015.00 240.4101MB Matte Black USD1,091.00 240.4101SB Satin Brass PVD USD1,114.00 240.4101BB Brushed Bronze PVD USD1,114.00
$959.00
