Filters
2512 products viewed
Filters
Tub / Shower Trim With Pressure Balance Valve - 2-Output
The PBV1005A – Pressure Balance valve with integrated 2-output diverter has a ½” NPT male connection with two inputs for hot/cold water and two output ports. The valve has a flow rate of 5.5 GPM @ 60 PSI.Supply Stops - There are two safety stops at each water inlet to prevent water flow in case of installation and repairs.Handle Operation - The volume and temperature of water is controlled by the lower handle. Lift the lower handle to control the volume and as the handle is moved between left and right, the temperature changes. Move it right for cold and left for hot water. The diverter handle on the top helps in directing the flow from the two outputs of the valve. When diverter handle points left, the water flows through the lower output. When the diverter handle points right, the top output is activated for water flow.Cut Out Dimensions - The cut out in wall should be 5.43” x 4.76” Inches which is properly covered by the trim plate. This will ensure that the trim plate will cover the cut out hole in the wall.Trims - The trim set for PBV1005A consists of a trim plate and handle knobs for both top and bottom cartridge. The trim plate has markings for hot/cold. Extension kits for both handles can be ordered separately in case the handles need to be extended for proper fit. Any *2100 or *2101 series trim can be used with this valve. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 100 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) UF.2102CP Chrome USD734.00 UF.2102BN Brushed Nickel PVD USD774.00 UF.2102MB Matte Black USD774.00 UF.2102SB Satin Brass PVD USD774.00 UF.2102DT Dark Tan USD883.00 UF.2102DGR Dark Green USD883.00 UF.2102RG Rock Grey USD883.00 UF.2102LT Light Tan USD883.00 UF.2102IG Flusso Green USD883.00 UF.2102VB Vortex Brown USD883.00 UF.2102DR Deep Red USD883.00 UF.2102LV Light Verde USD883.00 UF.2102AG Army Green USD883.00 UF.2102DG Dark Grey USD883.00 UF.2102LG Leaf Green USD883.00 UF.2102NB Navy Blue USD883.00 UF.2102GB Gloss Black USD883.00 UF.2102BP Blue Platinum USD883.00 UF.2102SKB Sky Blue USD883.00 UF.2102CR Crimson USD883.00 UF.2102GMG Gun Metal Grey USD883.00 UF.2102SG Steel Grey USD883.00
$734.00
Tub Spout
Collection Serie 230 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 230.2300CP Chrome USD301.00 230.2300MB Matte Black USD376.00 230.2300SB Satin Brass PVD USD376.00
$225.75
$301.00 USD
Two Handle Wall Mounted Bathroom Faucet
This product is a 1/2” NPT connection valve and trim combo with two volume control handles separately for hot and cold water with single mixed output.Handle Operation – The volume and temperature of the water are controlled by the two handles, HOT and COLD.Valve Installation – As the valve [Part # WLM.1900] is installed, care should be taken to maintain a proper distance from the back of the valve to the surface of the finished tile which should be between 2.39” and 3.09”. Also, the valve must be installed horizontally and not at an angle. In case, a tile is thicker, or wall is deep, extensions are used for elongating both handles of the valve to ensure the proper setting of the trim. Extension kits can be ordered separately in Chrome, Brushed Nickel, or other special finishes.Cut Out Dimensions – The cut out in wall should be 3 holes, 1.3 inches in diameter which will properly be covered by the trim plates. This will ensure that the trim plate will cover the cut out hole in the wall.Trims – The trims comprise of well-finished handle knobs, handle trims, cartridge covers, and spout. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 100 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 100.1950CP Chrome USD752.00 100.1950BN Brushed Nickel PVD USD784.00 100.1950MB Matte Black USD827.00 100.1950SB Satin Brass PVD USD827.00 100.1950BB Brushed Bronze PVD USD827.00 100.1950LV Light Verde USD956.00 100.1950SG Steel Grey USD956.00 100.1950DT Dark Tan USD956.00 100.1950DGR Dark Green USD956.00 100.1950RG Rock Grey USD956.00 100.1950LT Light Tan USD956.00 100.1950IG Flusso Green USD956.00 100.1950VB Vortex Brown USD956.00 100.1950DR Deep Red USD956.00 100.1950GMG Gun Metal Grey USD956.00 100.1950AG Army Green USD956.00 100.1950DG Dark Grey USD956.00 100.1950LG Leaf Green USD956.00 100.1950NB Navy Blue USD956.00 100.1950GB Gloss Black USD956.00 100.1950BP Blue Platinum USD956.00 100.1950SKB Sky Blue USD956.00 100.1950CR Crimson USD956.00
$752.00
Two Handle Wall Mounted Bathroom Faucet
This product is a 1/2” NPT connection valve and trim combo with two volume control handles separately for hot and cold water with single mixed output.Handle Operation – The volume and temperature of the water are controlled by the two handles, HOT and COLD.Valve Installation – As the valve [Part # WLM.1900] is installed, care should be taken to maintain a proper distance from the back of the valve to the surface of the finished tile which should be between 2.39” and 3.09”. Also, the valve must be installed horizontally and not at an angle. In case, a tile is thicker, or wall is deep, extensions are used for elongating both handles of the valve to ensure the proper setting of the trim. Extension kits can be ordered separately in Chrome, Brushed Nickel, or other special finishes.Cut Out Dimensions – The cut out in wall should be 3 holes, 1.3 inches in diameter which will properly be covered by the trim plates. This will ensure that the trim plate will cover the cut out hole in the wall.Trims – The trims comprise of well-finished handle knobs, handle trims, cartridge covers, and spout. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 160 Style Contemporary / Modern Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 160.1900CP Chrome USD765.00 160.1900BN Brushed Nickel PVD USD795.00 160.1900PN Polished Nickel PVD USD795.00 160.1900MB Matte Black USD847.00
$765.00
Two Handle Wall Mounted Bathroom Faucet
This product is a 1/2” NPT connection valve and trim combo with two volume control handles separately for hot and cold water with single mixed output.Handle Operation – The volume and temperature of the water are controlled by the two handles, HOT and COLD.Valve Installation – As the valve [Part # WLM.1900] is installed, care should be taken to maintain a proper distance from the back of the valve to the surface of the finished tile which should be between 2.80” and 4.81”. Also, the valve must be installed horizontally and not at an angle. In case, a tile is thicker, or wall is deep, extensions are used for elongating both handles of the valve to ensure the proper setting of the trim. Extension kits can be ordered separately in Chrome, Brushed Nickel, or other special finishes.Cut Out Dimensions – The cut out in wall should be 3 holes, 1.3 inches in diameter which will properly be covered by the trim plates. This will ensure that the trim plate will cover the cut out hole in the wall.Trims – The trims comprise of well-finished handle knobs, handle trims, cartridge covers, and spout. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 230 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 230.1950CP Chrome USD828.00 230.1950MB Matte Black USD915.00 230.1950SB Satin Brass PVD USD915.00
$828.00
Two Handle Wall Mounted Bathroom Faucet
This product is a 1/2” NPT connection valve and trim combo with two volume control handles separately for hot and cold water with single mixed output.Handle Operation – The volume and temperature of the water are controlled by the two handles, HOT and COLD.Valve Installation – As the valve [Part # WLM.1900] is installed, care should be taken to maintain a proper distance from the back of the valve to the surface of the finished tile which should be between 2.39” and 3.09”. Also, the valve must be installed horizontally and not at an angle. In case, a tile is thicker, or wall is deep, extensions are used for elongating both handles of the valve to ensure the proper setting of the trim. Extension kits can be ordered separately in Chrome, Brushed Nickel, or other special finishes.Cut Out Dimensions – The cut out in wall should be 3 holes, 1.3 inches in diameter which will properly be covered by the trim plates. This will ensure that the trim plate will cover the cut out hole in the wall.Trims – The trims comprise of well-finished handle knobs, handle trims, cartridge covers, and spout. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 240 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 240.1950CP Chrome USD759.00 240.1950BN Brushed Nickel PVD USD790.00 240.1950PN Polished Nickel PVD USD790.00 240.1950MB Matte Black USD837.00
$759.00
Two Handle Wall Mounted Bathroom Faucet
This product is a 1/2” NPT connection valve and trim combo with two volume control handles separately for hot and cold water with single mixed output.Handle Operation – The volume and temperature of the water are controlled by the two handles, HOT and COLD.Valve Installation – As the valve [Part # WLM.1900] is installed, care should be taken to maintain a proper distance from the back of the valve to the surface of the finished tile which should be between 2.39” and 3.09”. Also, the valve must be installed horizontally and not at an angle. In case, a tile is thicker, or wall is deep, extensions are used for elongating both handles of the valve to ensure the proper setting of the trim. Extension kits can be ordered separately in Chrome, Brushed Nickel, or other special finishes.Cut Out Dimensions – The cut out in wall should be 3 holes, 1.3 inches in diameter which will properly be covered by the trim plates. This will ensure that the trim plate will cover the cut out hole in the wall.Trims – The trims comprise of well-finished handle knobs, handle trims, cartridge covers, and spout. Depending upon the shower model, trims can be of different shape and size, varying from square to circular shower handles. Collection Serie 250 Style Transitional Warranty Limited Lifetime Warranty. See Warranty page for complete details. Available Finishes: Model# Finish List Price (USD) 250.1950CP Chrome USD839.00 250.1950BN Brushed Nickel PVD USD866.00 250.1950MB Matte Black USD902.00
$839.00
